Skip to main content

LAB TESTING ASSISTANCE

Testing, coordinated end to end.

We plan, book and witness the lab tests your Type Certificate depends on.

TEST TYPES

Six test types, one point of contact.

We coordinate the tests your Type Certification requires, from the test plan to the final report.

All tests are carried out at accredited third-party labs. We do not own a lab: we plan the tests, book the lab, prepare the samples, witness the tests and review the reports with you.

  • LIMIT

    EMI/EMC

    Checks that the drone's electronics do not emit excessive interference, and keep working when exposed to it.

    Under limit

  • Vibration

    Checks how the airframe, mounts and electronics respond to vibration from motors, propellers and transport.

    Vibration profile run

  • Thermal

    Checks how the drone and its components behave across the temperatures set out in the test plan.

    Thermal run complete

  • CYCLE01

    Battery

    Checks battery packs through charge and discharge cycles, and their behaviour under load.

    Cycle complete

  • Environmental

    Checks how the drone performs under the environmental conditions in the test plan, such as humidity or temperature change.

    Conditions applied

  • LOAD

    Material testing

    Checks the properties of the materials used in the airframe and parts, as the test plan requires.

    Sample tested

WHAT WE DO

We handle the coordination.

You keep one point of contact from the first test plan to the closed report.

  • Test planning and test plans

  • Selecting and booking accredited labs

  • Sample preparation

  • Witnessing tests

  • Reviewing reports and closing gaps

HOW IT WORKS

From test plan to closed gaps.

  1. 01

    Plan

    We agree which tests are needed and write the test plan.

  2. 02

    Book lab

    We select a suitable accredited lab and book the test slots.

  3. 03

    Prepare samples

    We help prepare the drone or samples to the lab's requirements.

  4. 04

    Witness

    We attend and witness the tests on your behalf.

  5. 05

    Report

    We review the lab report against the test plan.

  6. 06

    Close gaps

    We help you address any findings and record the result.

Test report ready

NEXT STEP

Plan your lab tests with us.

Tell us about your drone and the tests you expect to need. We will help you build the test plan.

Have a drone programme heading for certification?

Talk to our engineers — or start your Design Document on AeroCert.